|Forum Home > General Items > Testing Gold and Silver|
How to Make & Use Gold Test Solutions
Potassium dichromate salts and nitric and hydrochloric acids are needed to mix test solutions. Use a graduate measure for mixing required proportions. In larger cities the potassium dichromate salts and acids are available from chemical supply houses and in smaller cities from local drug stores.
SOLUTIONS: Mark bottles 1, 2, 3 - DO NOT INTERCHANGE TOPS
(Bottle 1) BELOW 14K AND BASE METAL
Mix 10 grams potassium dichromate salts with the ¾ oz. nitric acid plus ¼ oz. distilled water.
(Bottle 2) 14K-18K
Mix one part hydrochloric acid to 50 parts nitric acid and 12 parts distilled water.
(Bottle 3) ABOVE 18K
Aqua regia - Mix one part nitric acid to 3 parts hydrochloric acid.
File a notch in test piece, apply a drop of solution #1 - watch for color reaction.
SILVER (PURE)--Bright red SILVER (.925)--Dark red
SILVER (.800)--Brown SILVER (.500)--Green
TO DETERMINE KARAT
File a spot on a test piece and rub it on a test stone to leave a definite mark. Choose a test needle nearest to the test mark color and rub the needle on the stone next to the mark. If the needle mark reacts sooner than that of the test piece mark, the piece is of higher karat than the needle used. Trial and error will bring you close to the correct karat. Use bottle 3 for most testing.
TESTING FOR PRECIOUS METALS
SILVER: Pure silver is almost perfectly white, very ductile and malleable. Pure silver is too soft for general use. It is combined with copper to harden it. Sterling silver is 92½% silver and 7½% copper. Mexican silver is generally less than 90% pure silver. To test for silver: file a notch in the piece to be tested and apply a drop of #I solution. Sterling silver turns cloudy cream. In plated ware, the base metal will turn green.
GOLD: Pure gold is very soft and is combined with other metals to harden it. 24 karat is pure gold, thus 14 karat is by weight 14/24 fine gold and the balance an alloy metal. To test for gold: the gold testing items shown above are required. File a notch in the piece to be tested. Apply a drop of #1 solution. A bright green reaction indicates gold plate on copper or brass. A pinkish cream color indicates gold plate on silver. Ten karat gold will show a slight reaction; over ten karats, little or none.
PLATINUM-PALLADIUM: Use bottle #3. If platinum,
there will be no change. If palladium, it will turn red after
application of Aqua Regia #3. If the reaction to any test is too rapid,
dilute with distilled water.
Don't know if this will help, be careful with acids.....